Installing wall shelves properly requires some skills. However, by following a few steps, even a beginner can do it. How do you install wall shelves? The answer is in this article.
The necessary tools
To install wall shelves, you will need a few tools. Firstly, you will need a tape measure in order to take measurements and gain precision. Secondly, you will need a pencil to mark where the screws will fit. Finally, you will need a screw gun, a dowel gun and a hammer to fix them.
If you have bought shelves that just need to be put up, the screws are already the right diameter. Wooden or metal brackets will also be provided. They are recommended if you are going to place heavy loads on your shelves.
The number of brackets required depends on the thickness, length and weight of the shelves to be placed on top. For wall shelves with 2 cm thick shelves, the brackets should be placed every 60 cm. If the shelves are 3 cm thick, the brackets should be placed every 1 metre.
Preparing the installation
It is important to check the condition of your walls before drilling them for wall shelves. They must be strong enough to support the weight of the shelves and the loads they will carry. Also make sure that they do not hide any elements that could cause you problems such as electrical connections or water pipes.
In order to prepare for the installation of your brackets, you need to take measurements and mark the locations of your brackets. To ensure that your shelves are straight, it is advisable to use a spirit level. Once everything is in order, you can start drilling the holes for the dowels and screws.
Installing the shelves
To install wall shelves easily, it is useful to insert the screws with the appropriate dowels. Start by inserting them one by one by hand. To ensure that they fit into the holes drilled earlier, use a hammer to tap them in until the dowels are well anchored in the wall.
Then take your brackets and screw them in on both sides. Make sure that they are firmly fixed to ensure their durability and the safety of the objects that will be stored there. Finally, all you have to do is place the shelves and screw them in place to create a solid structure.